Harvia Outdoor Sauna Room (96" x 96" x 86")

Our outdoor Sauna is the same as our Prefab Sauna except that it includes an unassembled cedar shingle roof package. You supply the waterproof pad and we provide the insulated modular room. Outdoor Saunas may be assembled on a concrete pad or on a deck. If installing on a deck first put down a sheet of ¾" plywood covered by vinyl or use concrete board with tile. The roof package includes wood plates, prefab rafters, nailers, facing, metal flashing, cedar shingles, ridge cap, and nails. You put it together. It includes the same components as the standard Prefab package. The Harvia Outdoor Sauna is available in sizes ranging from 4'x 4' to 8'x 8'.

Packages Include:

• Assembled Benches
• Stones
• K10G Heater With Built In Controls
• Prehung Door With Clear Glass
• 0301K Thermometer
• 102N Bucket With Liner
• 106/40 Dipper
• P5511 Wall Light
• 079 Headrest For Each Upper Bench
• Bathing Sign
• Superdek
• Heater Fence
• Vents
• Standard rough sawn Mahogany plywood for the sauna exterior

FRP Roof Kit
FRP Roof Kit comes unassembled. The kit includes Facia pieces, Rafter sections, Risers, Nailers, Side Trim, Cedar Shingles, Top Ridge, Metal Flashing, Liner for underside of front, back, and sides, and Nails. Roofing felt paper is not included. The finished height is 8' 6". The roof overhangs the prefab Sauna by 6" on the back and the sides and overhangs 12" in the front. When using a roof kit power enters at the front of the side wall near the bottom, close to where the heater is located. The upper vent is cut in the ceiling and it vents through the eaves.

Outdoor Kit
The Outdoor Kit includes Stainless Steel Hinges, Wet Location Light Switch, Custom Electrical, and includes sealing the glass in the Sauna door and any additional sidelight windows

Both the above kits are included in the price as standard.

STR Starline Skylight Roof Kit  - Not available for this model.

Heater Specification

• Voltage: 240V
• Phase 1
• Amperage: 52.7 Amp
• Power: 10 kW
• Wire size: 6
• Equipped with timer
• Built-in control panel
• Thermostat and timer can be relocated
• Wall mounted unit
• Large stone space
• Outer casing temperature is left unaffected
• Desired sauna temperature is set by turning the knob
• Thermostat on lower part of heater
• Thermostat and timer are located on right or left side of the heater, as the requirement
• 388-600 min - max. cu.ft. sauna room
• Harvia HEATERS HAVE 5 YEARS LIMITED WARRANTY when installed according to Finlandia specifications and wiring information